Complete Fire Design Solutions

Title

Subtitle

Fire Hydrant System, Fire Protection Engineering

Fire Hydrant

A fire hydrant is an above-ground connection that provides access to a water supply for the purpose of fighting fires. Fire hydrant systems are an installation of pipes, water tanks, pumps, hydrant outlets and/or hose reels.Hydrant Systems can be of two types:


(a) External Hydrant System, where the hydrants are installed in the open, like the city or town water mains, or hydrant systems installed in the open areas in industrial or such other occupancies; and


(b) Internal Hydrant System, installed in buildings or structures to be protected


We design an integrated Hydrant System as per national and international norms. We consider capacity of fire pump, size and arrangement of pipes used for hydrant system, pressure at hydrant point against the available fire risk. Our designed Hydrant System is an arrangement of piping, valves, hose connection and allied equipment installed in building and structure with connection located in such a manner that water can be discharge in stream of spray patterns through attached hose and nozzle for the purpose not only extinguish the fire but at the same time save the occupants and contents of area in with better response time.


We design hydrant system as per TAC, Indian, OISD and NFPA Standards/ guideline.


Almost all part of the premises shall be covered by such system. Our designed system is not only complying the national and international norms/ guideline but also considered the exact requirement to minimize the cost at same time, increase the effectiveness of system for maximum gains.

Sprinkler Systems

Sprinkler System

In smaller workplaces, portable fire extinguishers will probably be sufficient to tackle small fires. However, in more complex buildings, or where it is necessary to protect the means of escape and/or the property or contents of the building, it may be necessary to consider a sprinkler system. Sprinkler systems are traditionally acknowledged as an efficient means of protecting buildings against extensive damage from fire. They are also now acknowledged as an effective means of reducing the risk to life from fire. Systems are being developed which may be suitable for use in workplaces with residential areas, such as care homes and houses in multiple occupancy. Sprinkler systems need to be specifically designed and installed to the appropriate hazard category in accordance with an approved code of practice


We offer Design & Engineering of an integrated Sprinkler System with fine protection engineering standards Network of specially sized or hydraulically designed piping installed in building, structure generally overhead with attached sprinkler in a systematic pattern proper location of alarm valve and orientation as per our best design practice makes us leader in designing this system.


We design sprinkler system as per TAC, Indian and NFPA Standards/ guideline.

Medium Velocity Water Spray System

Medium Velocity Water Spray System

This system applies water in finely divided droplets at medium velocity. This is mainly used for fire protection of areas with fire risks from low FP flammable liquids (FP below 65oC) and also for fire extinguishment of water miscible liquids (polar solvents, alcohols etc.). It gives protection to tanks, structures, equipments etc. by cooling, by controlled burning of flammable liquids and also by dilution of explosive gases.

We offer best Design & Engineering of an integrated MVW spray system as per national/ international standard and guidelines. During designing we consider that adequate coverage of the entire unit shall cover by MVW spray system.


Our designed system in accordance to international standards is an arrangement of Piping, Deluge & Automatic Value, Nozzle, Q.B. Detectors etc. to make an automatic or manually actuated fixed pipe system connected to a water supply to provide a specific water discharge and distribution over the protected surface of area.


We design water spray system as per national and international Standards/ guideline.

High Velocity Water Spray System

High Velocity Water Spray System

This is generally used for extinction of fires in flammable medium and heavy oils or similar flammable liquids having a flashpoint above 65oC. (eg: Transformer fires) The system projects water in the form of a conical spray, with the droplets of water travelling at high velocity. Extinguishment is achieved by the three principles of emulsification, cooling and smothering.


Some of the water droplets while passing through the flames get converted into steam, thereby achieving the smothering effect. The high velocity sprays of water are discharged through specially designed projectors. These systems can be operated either manually or automatically.


The water spray systems should have isolation facilities so as to enable periodic testing, maintenance etc. Normally, all cut-off valves should be locked open. The high velocity water spray system for transformer protection operates on the same principle as a deluge system. The detectors mounted on a separate pipeline on detecting the fire releases the compressed air within the pipe, thereby operating the deluge valve. This allows the water to flow out through the projectors in the form of high velocity water spray and extinguishes the fire. Generally, a water motor operated gong (as in the case of sprinkler systems) sounds the fire alarm. Sometimes, additionally an electrical alarm may also be provided.


We offer best Design & Engineering of an integrated HVW spray system as per national/ international standard and guidelines. During designing we consider that adequate coverage of the entire transformer unit including the conservation tanks; the bushings and the bottom area shall cover by HVW spray system.


Our designed system in accordance to international standards is an arrangement of Piping, Deluge & Automatic Value, Nozzle, Q.B. Detectors etc. to make an automatic or manually actuated fixed pipe system connected to a water supply to provide a specific water discharge and distribution over the protected surface of area.

Gas Based Flooding System

Inert Gas System, Co2 Flooding, FM200 System

Co2 at atmospheric pressure is a colorless, odorless and electrically Non Conductive inert gas, It has high expansion ratio which facilities rapid discharge and allows three dimensional quick penetration in the entire hazard area. Made from premium quality components, this system's importance lies in the fact that it has high efficiency to extinguish fire by reducing the oxygen content of the protected area below the point where it can support combustion. Designed to withstand every climatic conditions, these devices are widely used in following area of applications: 

  • Transformers, Power Generators, Machinery Spaces, Ships Holds, Electrical Equipments, Chemical Equipments, Chemical Work & Stores, Switch Rooms, Electric Movers, Solvent Stores, Dip Tanks, Oil Cellars etc

    We can design CO2, FM200, Inert Gas Based and Halon Substitute Gases Flooding system as per National and International Standards. 

Fire Alarm and Detection System

Fire Alarm and Detection System

We are able to offer Fire Alarm design, Fire Alarm supply and Fire Alarm installation on the full range of fire detection and alarm systems. 


Whatever your environment and fire protection needs we offer a range of Fire Alarm systems for use throughout the commercial, retail and education market places. We offer a comprehensive range of systems that we can tailor to your needs or alternatively we have the in-house expertise to design and implement a completely bespoke system for you. 


We can design the system as per the TAC, NFPA and BS norms

Related Services

Contact us

Email: info@cfdsolution.com 

Contact: +91 98250 79730